| 
Telephone:
+44 (0) 1457 869 889
email:
wecare@surebuyz.com




BUY
WITH CONFIDENCE
from


Use
the links below for
direct access to our
professional products







ScrollerZ

Personal
scrolling
displays

|

Bespoke
Professional Analogue 25 Pin D-Sub (DB-25) Lead
Van damme blue series studio grade 8 pair multicore
~ nickel plated 25 pin D-Sub hood ~ Neutrik NC3MXX male XLR's

NOTE!
Coloured boots shown in the image above are for illustration purposes
only and
are not included as standard. If coloured boots are required then
they must
be selected as an optional extra from
the drop down menu below.
SurebuyZ
/ CustomloomZ range of bespoke hand made professional 25 pin D-Sub
looms are made using Van damme blue series studio grade 8 pair analogue
multicore cable which is terminated at one end with a standard density
25 pin male D-Sub connector fitted with gold plated pins and
wired in accordance with the 'TASCAM' standard.
For robustness and effective screening we house the D-Sub connector
in a high quality 2 piece nickel plated metal hood. At the breakout
end the tails are terminated with 8 x Neutrik NC3MXX 3 pole male XLR's
with the breakouts / tails being approximately 30cm. long and over
sheathed in black Pliosil with numeric channel id. laminated onto
the tails just behind the boots. Additionally, coloured boots for
the XLR's are also available in 8 different colours as an optional
extra. This option can be selected from the drop down menu below.
The
colour coding for the XLR boots corresponds to the following:
Channel
# 1 = Brown ~ Channel # 2 = Red ~ Channel
# 3 = Orange ~ Channel # 4 = Yellow
~ Channel # 5 = Green ~ Channel # 6 =
Blue ~ Channel # 7 = Purple
~ Channel # 8 = Grey
The
jack screws which we supply as standard with our D-Sub hoods are imperial
UNC-440 but if your equipment demands M2.6 then these can be substituted
free of charge if stated at the time of ordering. Alternatively if
the screw size is not known then M2.6 can be purchased separately
at the reasonable price of £0.40 per pair.
The
connectors are professionally soldered using a lead free solder with
a 4% silver content to produce what we believe to be the finest D-Sub
leads available.
Full
technical details for both the cable and the connectors
can be viewed
in
a new window by clicking on the appropriate image below.
  
Buy
this lead now using our secure checkout hosted by

Prices
given below are in British Pounds (£) and exclude U.K. VAT and
shipping charges.
VAT
at the current U.K. rate will be added at checkout to all U.K and
E.U. residents.
Shipping charges according to destination will also be
added at checkout.
|