Blue series studio grade speaker cable

 

Van Damme Blue Series Studio Grade Speaker Cable caters not only for the recording studio environment but also for the rehearsal studio, live and presentation markets. All are twin-axial types and range from 0.75mm conductors for 100V line through to 6.00mm conductors for long runs of low impedance speaker signals.

 

 

 

Cable Specifications:

 

Applications:
• Critical studio monitoring
• Guitar amplifier to speaker leads
• Installations where low smoke zero halogen is not a requirement

Application notes:
• Conductors use fine stranding for ultimate flexibility
• Reduced OD 2 x 2.5mm will fit XLR connectors and mono jacks
• Ultra pure oxygen free copper for outstanding sonic integrity

Mechanical & Electrical specifications:
Conductor material ~ Bare ultra purel oxygen free copper
Insulation ~ PVC
Overall jacket ~ Flexible PVC composite sapphire blue RAL5003
Overall diameter ~ 2 x 0.75mm = 5.60mm Ø ~ 2 x 1.5mm = 6.50mm Ø ~ 2 x 2.5mm = 7.60mm Ø ~ 2 x 4.0mm = 11.00mm Ø ~ 2 x 6.00mm = 14.00mm Ø
Conductor stranding ~ 2 x 0.75mm = 42 x 0.15mm ~ 2 x 1.50mm = 84 x 0.15mm ~ 2 x 2.5mm = 147 x 0.15mm ~ 2 x 4.00mm = 227 x 0.15mm ~ 2 x 6.00mm = 189 x 0.2mm
Resistance (Ohms/Km) ~ 2 x 0.75mm = 24.50 Ohms ~ 2 x 1.25mm = 12.50 Ohms ~ 2 x 2.50mm = 7.30 Ohms ~ 2 x 4.00mm = 4.60 Ohms ~ 2 x 6.00mm = 3.20 Ohms
Working voltage ~ 300 / 500V
Test voltage ~ 2000V DC 1 minute
Halogen emissions ~ =0.30% Halogen acid gases according to IEC 60754-2