NP2RX-B ~ 1/4" (6.29mm) professional right angle phone plug 'X' series
all metal, no rivets ~ 2 pole (mono)
Connectors ~ NP2RX-B, 1/4"
Professional Right Angle Jack Plugs, X-Series
The 'X' series heavy duty professional phone plug improves on the design of the existing 'C' series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off of the tip. The 'X' series plug serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
Features & Benefits:
Extra
slim 1/4" plug for highest packing density
Robust diecast shell in stylish design
Improved chuck type strain relief for reliable cable retention
Sleek design for best handling convenience
Precision machined one-piece contacts - avoid hook up of tip contact
NP2RX-B Technical
Details:
Connector Type:- Plug
Gender:- male
Electrical:
Contact resistance:- depends on mating connector mO
Dielectric strength:- 1 kVdc
Insulation resistance:- > 2 GO (initial)
Insulation resistance:- = 1 GO (after damp heat test)
Rated current per contact:- depends on mating connector A
Rated voltage:- 50 V
Mechanical:
Cable O.D.:- 4 - 7 mm
Lifetime:- > 1000 mating cycles
Wire size:- 1 mm²
Wire size:- 18 AWG
Wiring:- Solder contacts
Material:
Bushing:- Polyacetal (POM) + PU
Contact plating:- 0.2 µm Au
Contacts:- Brass (CuZn39Pb3)
Insert:- Polyamide (PA 6.6 30 % GR)
Shell:- Zinc diecast (ZnAl4Cu1)
Shell plating:- Black chromium
Strain relief:- Polyacetal (POM)
Environmental:
Standard compliance:- IEC 60603-11 / EIA RS-453
Solderability:- Complies with IEC 68-2-20
Temperature range:- -20 °C to +65 °C