NP2RX ~ 1/4" (6.29mm) right angle professional phone plug 'X' series
all metal, no rivets ~ 2 pole (mono)
Connectors ~ NP2RX, 1/4" Right Angle Professional Phone Plugs, X-Series
The 'X' series heavy duty professional phone plug improves on the design of the existing 'C' series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off of the tip. The 'X' series plug serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
Features
& Benefits:
Extra
slim 1/4" plug for highest packing density
Robust diecast shell in stylish design
Improved chuck type strain relief for reliable cable retention
Sleek design for best handling convenience
Precision machined one-piece contacts - avoid hook up of tip contact
NP2RX
Technical Details:
Connector Type Plug
Gender male
Electrical:
Contact resistance depends
on mating connector mO
Dielectric strength 1 kVdc
Insulation resistance > 2 GO (initial)
Insulation resistance = 1 GO (after damp heat test)
Rated current per contact depends on mating connector A
Rated voltage 50 V
Mechanical:
Cable O.D. 4 - 7 mm
Lifetime > 1000 mating cycles
Wire size 1 mm²
Wire size 18 AWG
Wiring Solder contacts
Material:
Bushing Polyacetal (POM)
+ PU
Contact plating 2 µm Ni (Su)
Contacts Brass (CuZn39Pb3)
Insert Polyamide (PA 6.6 30 % GR)
Shell Zinc diecast (ZnAl4Cu1)
Shell plating Nickel
Strain relief Polyacetal (POM)
Environmental:
Standard compliance IEC 60603-11
/ EIA RS-453
Solderability Complies with IEC 68-2-20
Temperature range -20 °C to +65 °C